MoreWine Professional!

Speidel TS Style Thermowell Installation Options

In addition to the standard TM-140E thermometer & themowell option, Speidel offers a wide range of options when it comes to monitoring the temperature inside your Custom Tanks. Speidel recognizes that the modern winery is monitoring their tank temperatures electronicall, and that a clean, uniform and un-cluttered installation is essential to an efficient workspace, as well as aesthetically desirable. To that end, they make it an option to install either threaded DIN fittings to mount a thermowell to, or to punch 13mm or 18mm (1/2" or 3/4") holes to accommodate the installation of a weldless thermowell or Kreyer FermFix unit, in a variety of convenient and efficient locations on the tank.
 
The type and position of the temperature fitting are denoted by the part number.
 
Position Options:
TS1 - Front Left of Tank, next to Sight Gauge (Not for 900x1400 or 1100x1600 mm Rectangular Tanks)
TS2 - Center Back of Tank
TS3 - Offset 45deg Left from the Rear of the Tank
TS4 - Front of the Right Side Tank Wall (For Rectangular Tanks with Jacket Connections in position C1-C4)
TS5 - Rear of the Right Side Tank Wall (For Rectangular Tanks with Jacket Connections in position C5-C8)
TS6 - Front Right of Tank, next to Sight Gauge, with Sight Gauge offset to the left (Not for 900x1400 or 1100x1600 mm Rectangular Tanks)
TS7 - Front Right of Tank, next to Sight Gauge, with Sight Gauge in Standard Position
 
Fitting Type Options:
TS_A - Male DIN10 Threaded Fitting
TS_B - Punch 13mm hole for Weldless Thermowell
TS_C - Punch 18mm hole for Weldless Thermowell
TS_D - Male DIN20 Threaded Fitting
 
Example: TS2B = Punch 13mm hole for Weldless Thermowell at Center Back of Tank.
 
Please click on the part number link for the configuration you want in the table below. You'll be taken to the specific product page for that configuration where you can click to add it to your shopping cart for your tank.
 
Please note that only the TS1, TS6 and TS7 positions allow the installation of fitting D, the DIN20 threaded fitting.
 
 
Position Fitting Part Number
TS1 Male DIN10 Threaded Fitting TS1A
  Punch 13mm hole for Weldless Thermowell TS1B
  Punch 18mm hole for Weldless Thermowell TS1C
  Male DIN20 Threaded Fitting TS1D
     
TS2 Male DIN10 Threaded Fitting TS2A
  Punch 13mm hole for Weldless Thermowell TS2B
  Punch 18mm hole for Weldless Thermowell TS2C
     
TS3 Male DIN10 Threaded Fitting TS3A
  Punch 13mm hole for Weldless Thermowell TS3B
  Punch 18mm hole for Weldless Thermowell TS3C
     
TS4 Male DIN10 Threaded Fitting TS4A
  Punch 13mm hole for Weldless Thermowell TS4B
  Punch 18mm hole for Weldless Thermowell TS4C
     
TS5 Male DIN10 Threaded Fitting TS5A
  Punch 13mm hole for Weldless Thermowell TS5B
  Punch 18mm hole for Weldless Thermowell TS5C
     
TS6 Male DIN10 Threaded Fitting TS6A
  Punch 13mm hole for Weldless Thermowell TS6B
  Punch 18mm hole for Weldless Thermowell TS6C
  Male DIN20 Threaded Fitting TS6D
     
TS7 Male DIN10 Threaded Fitting TS7A
  Punch 13mm hole for Weldless Thermowell TS7B
  Punch 18mm hole for Weldless Thermowell TS7C
  Male DIN20 Threaded Fitting TS7D